Nvidia Corp. Computer Hardware 2 Manuale Utente Scaricare il pdf (Pagina 36)

Set Up the Hardware

Start the system, then connect the external source signal to the House

Sync connector (BNC) of the Quadro G-Sync II option card.

The Quadro G-Sync II supports the following external

synchronization signal types:

TTL (3.3 volt level)

Composite Bi-level (NTSC or PAL sources use bi-level composite

signals)

Composite Tri-level (HDTV sources commonly use tri-level

composite signals)

2. Check the LED on the connector panel.

A green LED means the hardware has detected the timing signal,

and you can proceed to the next step

An occasional red ﬂ ash is OK.

A red LED means the hardware can’t detect the timing signal.

Check the signal source and correct the problem before

proceeding.

Sync Source

Server

NVIDIA Quadro G-Sync II

Connector Bracket



NVIDIA Frame Synchronization Under Linux

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 75 76

Nessun commento

Nvidia Corp. Computer Hardware 2 Manuale Utente Pagina 36